Availability: Limited Quantities
The EB1 Backup is an extremely compact dual-output flashlight with a 200-lumen maximum output that can be used as a backup light for patrol officers or a duty light for plainclothes officers. It's also ideal for everyday-carry, self-defense, or outdoor applications. The EB1 features a virtually indestructible LED emitter and a precision Total Internal Reflection (TIR) lens, creating a beam with the optimum configuration for both reach and situational awareness.
There are three EB1 Backup models to choose from, differing in the tailcap type/switch type combination:
Click-type switch with tailcap shroud — Partially press tailcap pushbutton for momentary-on high output; press further to click constant-on high. Return to off and press or click again within two seconds for low output. Raised shroud around switch provides extra protection against accidental activation.
Click-type switch without tailcap shroud — Like the original E1B Backup. Partially press tailcap pushbutton for momentary-on high output; press further to click constant-on high. Return to off and press or click again within two seconds for low output. No shroud around switch.
Tactical switch without shroud — Partially press tailcap pushbutton for momentary-on low output; press further for momentary-on high output. Release to turn light off. Twist tailcap clockwise for constant-on low then high output. No shroud around switch.
The brilliant 200-lumen high output beam is ideal for identifying threats and overwhelming the sight of adversaries. The 5-lumen low output is perfect for reading a map, checking an ID, or navigating in low light with minimal degradation to your dark-adapted vision. The Backup can run at this level for 40 hours, a valuable feature for outdoor or emergency situations. A tough, lightweight Mil-Spec hard-anodized aluminum body protects the EB1 Backup’s sophisticated electronics, and its smooth contours minimize clothing snag and pressure points. A two-way clip allows head-up or head-down carry. All EB1 models are available in Black, Silver, and Desert Tan.
Virtually indestructible LED emitter regulated to maximize output and runtime
Two output levels — high for maximum light, low for extended runtime
TIR lens produces tight beam with enough surround light for peripheral vision
Coated tempered window resists impact, maximizes light
High-strength aerospace aluminum body, Mil-Spec hard-anodized for extreme durability
Choice of three models with distinct tailcap/switch options: Tactical type without switch shroud, Click-type with switch shroud, click-type without switch shroud. See details in Description
Two-way clip permits light to be carried bezel up or down
Weatherproof O-ring and gasket sealing
Available in Black, Silver, and Desert Tan
Includes high-energy 123A battery with 10-year shelf life
The variable-output M720V RAID WeaponLight produces brilliant 150-lumen white light or 240 milliwatts of infrared output for use with night vision devices—with no need for IR filters or spare lamps. Simply push and twist the self-locking selector ring on the dual-spectrum V-series head to switch between white light or IR illumination—or select the "disable" setting to prevent accidental discharges. In either spectrum mode, the M720V's TIR lens produces a tight beam suited for close- to medium-range applications with sufficient peripheral illumination for situational awareness. The highly efficient LEDs are virtually immune to failure since there's no filament to burn out or break.
The M720V comes with a pressure-activated SR07-M720V tape switch (with a 7" cable) that can be positioned where you choose. If your remote switch becomes damaged or disconnected, rotate your RAID WeaponLight's white-light selector switch to ";flashlight" mode and activate it directly via its integral pushbutton dome switch. (This same pushbutton switch provides low navigational white light when "flashlight" mode is not selected.) This selector switch also lets you choose three different white-light output settings: high, medium, or strobe. The IR selector switch, located on opposite side, offers high-, medium-, and low-output settings when IR mode is selected on head.
The M720V attaches solidly to your Picatinny rail via our Swing-Lever™ clamp, which self-adjusts to out-of-spec rails and features a lever lock to prevent loosening from recoil or impact. Built to withstand the rigors of combat, the M720V is constructed of high-strength aerospace aluminum with Mil-Spec hard anodizing for superior toughness and corrosion resistance and optically coated tempered glass for durability and maximum light transmission. It's also O-ring and gasket sealed to keep out dust, dirt, and moisture. Available in Black or Desert Tan.
The SureFire X400 Ultra WeaponLight integrates stunningly powerful white-light illumination and bright red laser aiming capabilities in one compact rail-mountable package, an extremely effective combination for close- to medium-range engagements in law enforcement, military, and self-defense applications.
A high-performance LED generates 170 lumens of brilliant white light that is focused by a Total Internal Reflection (TIR) lens to produce a tight beam with extended reach and significant surround light for peripheral vision. The X400 produces tactical-level light—enough to overwhelm an aggressor's dark-adapted vision—for 1.5 hours per set of batteries.
The X400 Ultra's 5-milliwatt laser sight, located below the primary light, emits a high-visibility red (635 nM) beam. The laser's aiming adjustment mechanism uses Nylok® screws that won't back out from the effects of recoil, which means it rarely needs to be re-zeroed.
Activating the X400 Ultra is done via ambidextrous switching located at the rear of body, providing one-finger control — press the switch on either side for momentary-on activation, flip up or down for constant-on activation. A separate switch at the rear of the X400 Ultra allows you to (1) activate white light illumination only, (2) activate white light illumination simultaneously with the laser sight, (3) activate the laser sight only, or (4) disable the entire X400 Ultra. See illustration at upper left.
Optional DG grip switches (for pistols) and a pressure activated XT07 tape switch (for long guns) permit the X400 Ultra to be activated without altering your grip on your weapon.
The versatile X400 Ultra can be attached to a pistol or a long gun since its Rail-Lock® system permits rapid attachment/detachment from either Universal or Picatinny rails. Its high-strength aerospace aluminum body is Mil-Spec hard anodized for superior toughness and corrosion resistance and is O-ring and gasket sealed to keep out dust and moisture.