Availability: In Stock
The K.I.S.S.® in the Dark features blade, frame, clip and hardware in black non-reflective plating that is tough and long lasting. Like all folding knives in the K.I.S.S. family, Ed Halligan's unique two-piece construction features an integral frame lock, and a breakthrough design which seals the cutting edge against the handle.
A thumb stud is used to one-hand open the blade, and as the blade is fully rotated open, the frame lock snaps crisply in behind the blade to give a sound lockup. The blade can be closed with one hand, simply by releasing the frame lock.
The Original K.I.S.S.® blade shape is Tanto-inspired—Chisel-Point grind on the front and flat on the backside—so that when the blade is closed onto its handle/frame, the precision fit effectively "seals" the cutting edge to the frame, even though it's exposed. Both Razor-Sharp and Combined Razor-Sharp and Triple-Point™ Serrated edge grinds are available. Both blade and frame are 420J2 stainless.
The design of the K.I.S.S. series pocket/money clip permits them to be used in a variety of ways: clipped to the pocket; as a money clip knife; and with split-ring or lanyard, as a key chain knife.
The variable-output M720V RAID WeaponLight produces brilliant 150-lumen white light or 240 milliwatts of infrared output for use with night vision devices—with no need for IR filters or spare lamps. Simply push and twist the self-locking selector ring on the dual-spectrum V-series head to switch between white light or IR illumination—or select the "disable" setting to prevent accidental discharges. In either spectrum mode, the M720V's TIR lens produces a tight beam suited for close- to medium-range applications with sufficient peripheral illumination for situational awareness. The highly efficient LEDs are virtually immune to failure since there's no filament to burn out or break.
The M720V comes with a pressure-activated SR07-M720V tape switch (with a 7" cable) that can be positioned where you choose. If your remote switch becomes damaged or disconnected, rotate your RAID WeaponLight's white-light selector switch to ";flashlight" mode and activate it directly via its integral pushbutton dome switch. (This same pushbutton switch provides low navigational white light when "flashlight" mode is not selected.) This selector switch also lets you choose three different white-light output settings: high, medium, or strobe. The IR selector switch, located on opposite side, offers high-, medium-, and low-output settings when IR mode is selected on head.
The M720V attaches solidly to your Picatinny rail via our Swing-Lever™ clamp, which self-adjusts to out-of-spec rails and features a lever lock to prevent loosening from recoil or impact. Built to withstand the rigors of combat, the M720V is constructed of high-strength aerospace aluminum with Mil-Spec hard anodizing for superior toughness and corrosion resistance and optically coated tempered glass for durability and maximum light transmission. It's also O-ring and gasket sealed to keep out dust, dirt, and moisture. Available in Black or Desert Tan.
The SureFire X400 Ultra WeaponLight integrates stunningly powerful white-light illumination and bright red laser aiming capabilities in one compact rail-mountable package, an extremely effective combination for close- to medium-range engagements in law enforcement, military, and self-defense applications.
A high-performance LED generates 170 lumens of brilliant white light that is focused by a Total Internal Reflection (TIR) lens to produce a tight beam with extended reach and significant surround light for peripheral vision. The X400 produces tactical-level light—enough to overwhelm an aggressor's dark-adapted vision—for 1.5 hours per set of batteries.
The X400 Ultra's 5-milliwatt laser sight, located below the primary light, emits a high-visibility red (635 nM) beam. The laser's aiming adjustment mechanism uses Nylok® screws that won't back out from the effects of recoil, which means it rarely needs to be re-zeroed.
Activating the X400 Ultra is done via ambidextrous switching located at the rear of body, providing one-finger control — press the switch on either side for momentary-on activation, flip up or down for constant-on activation. A separate switch at the rear of the X400 Ultra allows you to (1) activate white light illumination only, (2) activate white light illumination simultaneously with the laser sight, (3) activate the laser sight only, or (4) disable the entire X400 Ultra. See illustration at upper left.
Optional DG grip switches (for pistols) and a pressure activated XT07 tape switch (for long guns) permit the X400 Ultra to be activated without altering your grip on your weapon.
The versatile X400 Ultra can be attached to a pistol or a long gun since its Rail-Lock® system permits rapid attachment/detachment from either Universal or Picatinny rails. Its high-strength aerospace aluminum body is Mil-Spec hard anodized for superior toughness and corrosion resistance and is O-ring and gasket sealed to keep out dust and moisture.